Shining HydraulicShining HydraulicHYDRAULIC ENGINEERING

WT Welded Hydraulic Cylinders. Product image for reference; final configuration follows the agreed drawing.

Agricultural machinery · PRODUCT PROFILE

WT Welded Hydraulic Cylinders

WT welded cylinders with cross-tube mounts, piston wear rings and a removable screw-in gland. SAE porting is available on 5-, 6- and 8-inch bore sizes.

  • WT series
  • Cross-tube mounts
  • Screw-in gland
Discuss this product Drawings & references
Send your application details or drawing to confirm the required configuration.
PRODUCT DESCRIPTION

Welded cross-tube cylinders with a serviceable rod-end gland.

WT welded cylinders use cross-tube mounts welded to both the rod end and base end. The internal assembly combines a heavy-duty piston and piston stem with wear rings that reduce friction during cylinder movement.

A screw-in gland can be removed from the rod end for servicing. SAE porting is available on 5-, 6- and 8-inch bore sizes.

AT A GLANCE

Product details

Product family
WT Welded Hydraulic Cylinders
Application category
Agricultural machinery
Product profile
WT series · Cross-tube mounts · Screw-in gland
Configuration review
Confirm dimensions, interfaces and operating conditions for the selected application.

Review product-specific features and confirm fit against the current drawing before ordering.

DESIGN AND APPLICATION

Key features

Explore the product functions and design details below. Final dimensions and configuration are agreed for the selected application.

  • 01

    Welded cross-tube mounts

    Cross-tube mounts are welded to both the rod end and base end.

  • 02

    Piston assembly with wear rings

    A heavy-duty piston and piston stem are fitted with wear rings to reduce friction during cylinder movement.

  • 03

    Removable screw-in gland

    The gland unscrews and can be removed from the rod end for servicing.

  • 04

    SAE porting on specified bore sizes

    SAE porting is available on 5-, 6- and 8-inch bore sizes.

SUPPLIER REFERENCES

Drawings & References

These images are supplier source references for this product family. They do not confirm dimensions or configuration for your equipment. Confirm the selected model, applicable units and current drawing with Shining Hydraulic.

Supplier source reference only for WT cylinders. Do not transcribe values as confirmed product specifications. Confirm model, units, and current drawing with Shining Hydraulic.
Discuss these references

What to include in your inquiry.

A drawing is a useful starting point. If you do not have one, send the details you know and identify what still needs to be agreed.

  • Bore, rod diameter and required stroke, or an existing cylinder drawing.
  • Retracted and extended pin-to-pin lengths.
  • Cross-tube pin diameters, mounting widths and orientation.
  • Working pressure, oil supply and operating cycle.
  • Port thread, position and any hose-clearance limits.
  • Order quantity, reference part number and delivery destination.
Prepare an email for this product
SPECIFY WITH CONFIDENCE

Before you specify.

What mounting arrangement is shown for the WT cylinder?

The WT product is described with welded cross-tube mounts at the rod and base ends. Confirm the dimensions of both mounts against your machine drawing.

Can the rod-end gland be removed?

Yes. The published WT configuration has a removable screw-in gland at the rod end. Confirm the current drawing and maintenance procedure for the selected size.

Are all WT sizes supplied with the same ports?

Port availability depends on the selected configuration. State the required port thread and location when requesting details; do not assume one port arrangement applies to every bore size.

DISCUSS YOUR APPLICATION

Put your requirements in the picture.

Send the WT Welded Hydraulic Cylinders application details, drawing or reference part, required configuration and quantity. We can discuss your equipment before a quotation.

Email your requirements gscseo11@gmail.com